啮合同向双螺杆挤出过程非啮合开槽螺纹元件组合流道三维流场分析

应用ANSYS有限元分析软件对啮合同向双螺杆挤出过程包括非啮合多过程螺纹元件（NI-MPE）组合流道进行了等温非牛顿三维流场模拟分析，得到了包括NI-MPE元件的组合流道的压力场、速度场、剪切速率场和剪切应力场，并与包括非啮合常规螺纹元件的组合流道的模拟结果进行了对比。     

新技术在液氯工序中的应用

介绍了经济器螺杆式氯气液化机组液化法和液氯液下泵输送技术的应用情况及取得的经济效益。     

裂解气压缩机级间注水技术的应用

介绍了裂解气压缩机由注洗油改为注水情况，进而得出结论：改注水降温效果明显，压缩机工作效能可得到有效保障。     

四螺棱往复螺杆挤出机的研制

介绍了四螺棱往复螺杆挤出机的研制情况；着重叙述了新研发的四螺棱往复螺杆与传统的三螺棱往复螺杆的特性，并作了比较和分析；对四螺棱往复螺杆在设计和加工中的难点及其在工作时的“柔性”特征等进行了阐述。     

Study on the thermoplastic vulcanizate using ultrasonically treated rubber powder

Nowadays, waste EPDM (ethylene propylene diene monomer) increasingly has been causing significant environmental problems with increasing numbers of vehicles. From the perspective of the environment and economics, recycling is the best method to treat waste materials. This study investigated waste EPDM/PP (polypropylene) blends with waste EPDM. Waste EPDM powders were treated ultrasonically, which physically modifies the rubber particles to confer good mechanical properties. Also investigated were the relevance of the mass percentage of the dispersed phase, the influence of the geometry and rotation speeds of the screw used in extrusion, and the melting temperature of PP materials on the morphology and mechanical properties of the blend. The purpose of this study was to develop a valuable thermoplastic elastomer from waste EPDM. This study concentrated on determining the optimum conditions for producing a blend by extrusion, including parameters of screw geometry, screw rotational speed, and operating temperature. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2503–2507, 2003     

Air-source heat pump coupled with economized vapor injection scroll compressor and ejector:Design and experimental research

Ejector can utilize high pressure energy from liquid mechanism,it can be used in heat pump system coupled with economized vapor injection(EVI)scroll compressor.When running under low temperature conditions,the performance of the EVI system with ejector can be improved further.In this paper,the design method of the heat pump system with ejector is presented,and the process for designing the heat pump with ejector(EVIe)was summarized.One prototype heat pump was designed under the condition of the evaporation ...     

麻辣休闲食品的研制

对双螺杆蒸煮挤压机挤压面类麻辣休闲食品配方进行了研究。实验以小麦粉和大豆分离蛋白为蒸煮挤压产品的主要原料,利用正交设计方法将休闲麻辣食品的配方优化为：辣椒的添加量0.8%、孜然的添加量0.7%、麻椒的添加量为0.4%。     

精密丝杠匀速校正系统上位机设计与实现

该文针对丝杆的螺距受到机械加工等物理条件的限制,在一定精度要求下,不可能完全均匀。加载在丝杆上移动的物体,在单位时间上,其速率可以认为是变速运动。该文主要提出了一种精密丝杠校正系统设计方法,提出在一定精度要求下,能够使移动物体匀速运动的电机控制算法,并给出了上位机设计过程。校正算法由C++实现,上位机由MFC实现,采用Matlab与VC混编的方法绘制控制曲线。     

Effects of circumferential configuration concerning splitter blade on the aerodynamic performance in a transonic axial fan

For a certain type of transonic axial fan, the flow field of a fan rotor with splitter blade was computed by numerical simulation, and the shape of the rotor was modified. The effects of different circumferential distributions concerning the splitter cascades upon the aerodynamic performance were investigated. The studies show that the optimum splitter cascade is not very close to the suction side of main blade. The load between the main blade and the splitter blade can be soundly distributed in terms of the adjustment of circumferential position of the splitter blade. The best aerodynamic performance can be successfully obtained according to the optimum shape of the expanding fluid channel reasonably formed by the splitter blade and the main blade.     

高速滚珠丝杠副弹性变形的有限元分析

对于高速滚珠丝杠副,考虑螺旋升角的影响,建立了滚珠丝杠副的受力模型,利用有限元方法分析计算了螺旋升角对滚珠丝杠副弹性变形的影响.结果表明,随着螺旋升角的增大,滚珠丝杠副的法向弹性变形量变化不大,而轴向弹性变形量减少,更有利于提高定位精度.